E-vent zn
The Empire(R) E-vents tm goggle system is a new, low profile goggle system designed to
present the minimum target possible while being soft and flexible for comfort and to
help keep you in the game by glancing/bouncing paintballs.  The soft faceplate of the "top
model" is re-enforced by a flexible yet strong mouth guard which allows the front of the
mask to flex on impact, but stops full paintballs from pushing through or lifting it up,
and thus protects your lips and mouth.

These goggles have a special venting system designed to work functionally with the way
you breathe.  The mouth vents are located so you breathe and shout through the vents
rather than into a large mass of plastic or rubber as with other goggle systems.  as your
breath hits the front of the mask, it either exits directly or is deflected sideways and
outwards.  There are specially shaped vents which take the deflected breath and move it
out from the face plate.  These specially shaped vents project your voice and warm
breathe out to the sides, and not up into the goggle.  As your breathing warms the front
of the mask, it heats up dry air in the "demist guide".  This demist guide is specially
designed to prevent hot moist air from your breath getting through vents in the bottom
of the goggle.  Instead, the heat is transferred to dry air in the demist guide making it
rise and move up across the lens of the goggle.  As this air rises, it draws in fresh, dryer
air from the back and sides of the goggle.  This allows you to have a flow of air across the
lens to help avoid fogging, while ensuring no moist air gets from your breath into the
lens area.  Side baffles in the faceplate prevent warm moist air from moving up into the
goggle so your voice and hot air es expelled in the direction you want it to...out through
the mask.  The ear pieces are designed to cup around your ears so your ears can sit in a
very natural position and your hearing with the goggle on is just like it was without the
goggle.  We didn't put excessive cosmetic venting into the mask like many other companies
do, because it wasn't needed due to the advanced design and to keep the smooth, clean
lines that make paint more likely to glance off the goggle and to make it easier to clean
when paint does get into the goggle.
  • Empire goggles come with removable soft ear pieces and an even lower profile faceplate
    for the maximum reduction in target, and ultimate "cool" factor.
  • The lens system is a very advanced and optically correct. Although, at first glance it looks
    like a "flat lens," it actually changes in thickness to maintain the best optical quality
    possible.  The power imbalance, which means how your eyes see straight ahead, is 0.00
    for both spherical power imbalance and astigmatic power imbalance (the value is so small
    it can't be read with conventional testing equipment).  What does this mean?  It means
    what you are seeing is really where you think it is, so you can be more accurate in your
    shooting.
  • The lens is an extremely safe and quick release system.  It can be replaced in seconds,
    yet is held very securely into the mask and frame. Unlike other quick release systems, the
    Empire E-Vents lens fits in under the nose piece.  This means the nose area doesn't
    deflect in when shot, so it prevents the ingress of paint into the goggle under the lens.  
    To further lock the lens into place, there is a "tongue and groove" around the edge of the
    lens and goggle.  This prevents shots at the edge of the lens forcing paint up into the
    goggle and helps maintain a high safety factor.  The lens is held in at the sides with very
    robust retainers,  which also hold the logos.  This simply pushes through the lens and the
    goggle, then secured in place inside the frame by placing the end of the strap clip over
    the retainer and twisting down into position.  The added safety being that you can't have
    the strap in place if the lens isn't in the goggle properly.  So you can't wear the goggle
    until a lens is in place.  It's a very quick and easy process, so you can pick and choose
    lenses to suit your playing conditions.
  • The goggle has the ability to add the included visor or brow shield.  These are made of
    flexible material and are easy to fit or remove without the use of tools, and with no other
    separate small pieces to get lost in your kit bag.  
  • The vents  goggles  come with a high quality strap with silicone beading to help keep the
    mask firmly on you head. MSRP: $99.95